Silicone heat-resistant paint
Your location: Home > Product Center > Industrial lacquer > Silicone heat-resistant paint
Silicone heat-resistant paint (200 ° C, 300 ° C, 400 ° C, 500 ° C, 600 ° C)
browse:11268time     Release time:2020-08-19

Product application

Usage: This paint can dry by itself and has excellent water resistance and heat resistance. It can be used on the surface of steel equipment to provide good heat protection.

Product color and composition

Color: Aluminium pink, all solid colors

Composition: This paint is composed of a copolymer varnish made of silicone resin and phenolic resin, and is packaged with aluminum powder or other heat-resistant dyes.

Technical parameters

Original paint viscosity: (25℃) ≥13 seconds (apply -4 cups)

Number of coating coats: 1-2 coats;

Theoretical coating area: 7-8m ² /kg

The thickness of one coat of paint film: The wet film thickness is approximately 50 μm, and the dry film thickness is approximately 25μm.

Drying time: (At 25℃) Surface dry ≤4 hours

Practical work ≤24 hours;

Coating interval: (25℃) Minimum 24 hours, maximum unlimited hours;

Thinner: Silicone paint thinner, usage 10-15% (by weight)

Construction methods: Spraying, brushing

Surface treatment: Remove surface oil stains, moisture and impurities, etc.

Construction conditions: To prevent water vapor condensation, the temperature should be above the dew point, the relative humidity below 80%, and good ventilation should be maintained during the drying period.

Complementary coatings: The previous complementary coatings include silicone putty, silicone heat-resistant primer, etc

Storage period: 12 months;

Packaging specification: 10kg per drum

Technical parameters

Safety: Spray in a well-ventilated area. If necessary, take appropriate safety precautions and pay attention to fire prevention.

Liability Statement: The information contained in the above product construction guide can only be used as a usage guide. Anyone who wants to use this product for their own purposes must inquire with our factory in advance whether it is suitable. Otherwise, our factory will not be responsible for any efficacy or loss. The information contained in this guide may be changed at any time due to the continuous development of our factory's products and the accumulation of experience.


prev:no more next:Silicone heat-resistant primer (200 ° C, 300 ° C, 400 ° C, 500 ° C, 600 ° C)

辽ICP备11000291号-1

Shenyang website construction:Seqill Media provides full-process online planning

Friendly links: